Have you ever tried to turn on the shower and find the current of water too strong and painful? Once people see the water that flows from their showers, they generally visualize the rain, something soft but refreshing. You have several options when you are looking for a new low-flow shower head. There are 7 factors that make up a good shower.
Pressure Compensation Technology
Lots of newer models have built-in pressure compensation components, so it does not matter what the water pressure is, the gallons per minute used and the shower feel remains properly consistent. As water pressure differs from one building to another and from one region to another, it was a vital factor.
Full Face Spray Pattern
The spray pattern is an important factor in defining how a shower feels. What we discovered is that people liked tremendously the complete face spray with various nozzles that covered the entire face of the shower head. This extends the water so it does not sting your skin such as many of the inexpensive brands we tried.
Many consumers want an elegant look of low-flow shower heads without the cost associated with high-end accessories. Luckily, there are lots of options to select from that will match almost any decor, including polished chrome and brushed nickel as well as brass.
Anti-Clogging Spray Nozzles
Metal faces shower heads tend to clog and deteriorate much faster than the newer rubber shower heads. Flexible nozzles may be cleaned by running a fingernail over the surface when the water is running. This diminishes the maintenance time and extends the life expectancy of the equipment.
Uses Less Than 1.6 Gallons per Minute
The extreme flow rate allowed by law is 2.5 gpm. One of the objectives of our study was to conclude if a lower flow shower head could meet your criteria. It turns out that some did.
Aeration is the overview of air into the path of the water flow to increase the size of the water bubbles. This creates it looks like there is more water than there actually is. The addition of cooler air means that warmer water is needed to preserve the similar temperature. Comfort versus energy conservation. Fortunately, you can find some models without ventilation that provides a comfortable shower experience.
Conservation of Energy
There are two features that conserve energy: pressure compensation and the technologies without aeration. One more feature that you can find that conserves water and energy is a technology which turns off the water after it is heated during the warm-up phase of the shower. If you are ready to enter, simply pull a chain and your warm shower is set for you.
Several times, if the shower is turned on in the morning, you must wait a few minutes for the water to warm up. Many of us tend to turn and do something different and come back once there is steam in the shower head. When you turn off the water the moment it is ready, some gallons are kept and usually wasted every time you take a shower.
Check out with http://showerheadshq.com for more informations and help.